Solaris review. A life’s work: Three views on the John Bowen Solaris …
First: “The Solaris is a fusion of the most important synthesizer designs of the past 40 years”
It may sound presumptuous: the John Bowen Solaris is in some ways the epitome of synthesizer design since the 70s. Let’s see … there are various oscillators to choose from: Minimoog, CEM, Microwave, Prophet-VS, Wav (samples). Or consider the filters: Moog, Oberheim, SSM, multimode filter, comb filter, vocal filter … The modules are a journey through synthesizer history. Sure, it’s all purely digital, but the sound quality is excellent. Impressive.
Second: “The Solaris is the life work of a synthesizer enthusiast and musician”
The Solaris’ enormous musical potential is no accident. As the first ‘official’ demonstrator for Moog, as co-founder of the Prophet-5, as part of the team that developed vector synthesis (the actual concept for VS came from Chris Meyer) and due to his decades of experience in playing instruments and programming factory sounds – Bowen has been able to contribute his vast knowledge to the development of the Solaris. Above all, Bowen is a real musician. All this is reflected in many details and in the user-friendly Solaris concept.
Third: “The king is dead, long live the king!”
Many years ago I realized that the polyphonic analog synthesizers of the late 70s and early 80s had ushered in their own demise. Polymoog, OB-X, ARP Quadra, Prophet-5, Rhodes Chroma, Memorymoog, Yamaha CS-80 and PPG Wave 2.2 … many of those instruments never left the prototype status, strictly speaking (you’ll pardon my slight exaggeration). Only a few instruments were actually “very” reliable, such as the Roland Jupiter-8 or Oberheim OB-8. Well-to-do musicians often had several units of the same instrument with them on tour, a prophylactic measure against the all-too-common technical failures. Vintage polyphonic synthesizers were (and are!) simply unreliable … and they’ve always been very expensive.
Today, skilled technicians have been able to bring some of those instruments up to the technical standards that would have been very desirable 30 years ago. Sophisticated services and major modifications on the Rhodes Chroma or Memorymoog, e.g., have refined these instruments to a high degree (although this, by very modern standards, is unfortunately still “limited”).
Anyway, no wonder the appearance of digital in the mid 80s was so overwhelming. In addition to an increase in polyphonic options, the digital instruments were significantly cheaper, more compact and more reliable as well.
But that’s not the end of the story. Digital synthesizers had (and still have) other limitations. Many of them are in some way inoperable, their dynamic ranges unspectacular, a lack of musical quality in their sounds, etc. Programming Yamaha’s FM was (and is) not everyone’s cup of tea, ditto for Casio’s phase distortion (a mysterious handling of envelope parameters). And working with sampled sounds has led to a lot of thoughtless playback-music. What we needed was intelligent sound programming! The typical manufacturers’ strategy (we’re talking about Roland, Yamaha, …) was to try to compensate for the lack of programming options by offering an even larger contingent of sounds (thousands of sounds, which is a horror when one thinks about it).
Many digital synthesizers are miles away from being musician’s instruments, a situation little changed today (with exceptions few and far between). Keep in mind, we’re talking about “polyphonic” synthesizers! Although the industry has tried to make the use of the instruments more palatable in recent years with the addition of a few buttons and sliders, the creative potential of the “user-friendly” instruments has not significantly increased. Ultimately, most digital polyphonic synthesizers are nothing but sophisticated sample players. A Renault R4 with a Porsche emblem on the hood, if you will.
John Bowen’s Solaris closes this gap. Although purely digital, it’s a programmers’ instrument, a music synthesizer for musicians. Solaris offers direct access to the entire sound structure, it invites you to create your own sounds “starting from scratch”, that is, with the oscillators …. The Solaris offers no piano, guitar or saxophone samples (you can load appropriate samples if you absolutely have to)! The instrument has enormous creative potential, fantastic performance features and thus provides a real synthesizer in the most beautiful and best sense of the word. Above all, the emitted sound quality is excellent.
Correctly speaking, Alesis Andromeda, Jomox SunSyn and a very few other instruments have closed part of the gap between vintage and modern polyphonic synthesizers during the last 15 years. But the Solaris’ extremely comprehensive sound architecture (wavetables, etc.) is clearly a giant step ahead …
Good things come to those who wait …
Rarely have I longed for the development of an instrument as much as for that of the Solaris. Well, good things come to those who wait. In this case, it was a long wait: From the first announcement to the final model, it has now been several years. John Bowen had some bitter setbacks to deal with, followed by forced breaks when he had to refinance the instrument. But Bowen’s persistence has paid off: The sophisticated and versatile Solaris will be a momentous success.
A couple of impressions …
The first contact with my Solaris brought some surprises. The instrument was easily unpacked – solid cardboard, foil to protect the instrument – as should be. It initially felt good, stable and robust. But there was this additional little packet in the box with – hold on here – an external power supply! At least it was a very efficient and power-saving power supply, or so it said in the directions. True, the big advantage of external power supplies is that there is no significant heat development inside the instrument, a fact I always find reassuring. And, should the transformer be faulty, this could be replaced without sending the whole Solaris off for repairs. But the fact remains, that external power supplies are not a very elegant solution!
“Yes, the power supply is outside of the synth. This avoids noise in the audio, and makes things simpler in the production.” (John Bowen in his Solaris User Guide p. 9)
Well, that’s true.
Let’s stay with the hardware and some of the finer things in life. The Solaris keyboard is – how else could it be – excellent. The feel is good. Also excellent the joystick, the display, the buttons and knobs. Or maybe “satifactory” is more accurate here, for two reasons. First, we all know that the hardware of the noble 70s and early 80s cannot be matched today. Second, Solaris production (currently in Germany) has not yet banned minor weaknesses. Pitch wheels without properly closing zero points and other such irritations are an indication that the production still has potential for improvement. As John Bowen and his team are on their toes, such shortcomings should be remedied soon.
Let’s continue with the hardware. There’s a huge choice of rear panel connections: 8 individual outputs, four independent inputs (although only monophonic) and USB, S/PDIF, MIDI plus two pedal inputs and a Compact Flash card slot.
Due to what John Bowen calls “old school” layout and control (the Oberheim Matrix-12 and Xpander probably served as models), quick and precise programming is innate to the instrument. As with the Oberheims, the Solaris programming is divided into “Pages”. The MAIN page is all about oscillators, waveforms, pitch (> oscillator section) and filters, filter types, frequencies and resonance settings (> filter section), etc. Pressing the MODulation button brings up the associated MOD page. This principle is the same throughout the signal path (OSCs, LFOs, Filters, VCAs, ENVs …) – everything very precise and extremely user friendly …!
Concerning the instrument’s polyphonic potential, a precise assessment is difficult. We have no exact information on how many voices the Solaris has. But speaking from practical experience, there are hardly too few voices. Notes may be capped when playing fat clusters if release time is set to a maximum of 20 seconds. Obviously, polyphony depends on processor performance (… the power plant inside the Solaris consists of six state of the art third-generation SHARC DSP processors).
“Even with a complex program utilizing all four oscillators, four filters, four mixers and healthy doses of modulation, you can still expect 10 note polyphony!” (www.johnbowen.com)
You will probably have little reason to fully realise the Solaris potential at hand. A two- or three-part sound will generally fulfill all of your needs. As a rule of thumb and in my opinion, the Solaris will place 10 to 20 voices at your disposal. When I asked him, John was more cautious: “… for now it is fixed at 10 voice polyphony.” (John Bowen)
Sound and Performance
Now things get interesting. The bottom line is musical quality, the most central question about an instrument. Sound and performance stand in direct relation to each other and should be dealt with together. A good sound requires immediate access and user-friendly tools.
With Solaris you have four parallel synthesizers (“parts”) in one package, which means many oscillators, many waveforms, a myriad of mixers and filters, countless envelopes and first-class modulation possibilities. Enough to keep you investigating new sounds for at least the next 20 to 30 years. Now to the crux of the matter: the Solaris sound quality results from, among other things, a surprisingly wide dynamic range potential. Herein lies the central weakness of most digital synthesizers – they may sound brilliant, but at the cost of reduced dynamic flexibility. They always sound a little “flat”. The dynamic flexibility of a single analog voice, from say a Minimoog or a Pro-One, is capable of bringing any digital sound to its knees.
A musician friend recently reported from Munich that a brand new Roland Fantom keyboard used at a rock concert had no chance in the mix, whereas the little antique Moog Satellite squatting next to it came through clearly.
Originally, I had exactly these concerns regarding the Solaris. Digital is digital, there’s no way around that – and a VCA is the only thing that allows for wide dynamic range. However, the Solaris dynamic potential is impressive. Probably as good as can be had on a digital basis. Incidentally, don’t let the label “VCA” confuse you. It’s just not true. John has confirmed my suspicions:
“Sorry, the Solaris is all digital. Originally I had the word amp instead of VCA, which I guess we should have left there, but I kept calling them VCAs, so we changed it. Think “Virtually Controlled Amplifier” ;-) (John Bowen)
In the Solaris, extensive sound material meets high sound potential, and the two encounter remarkable performance potential: A weighted (grippy) keyboard, assignable wheels, a joystick, a multiple zone ribbon controller, etc … These are the decisive ingredients for good sound performance. In addition, there is that small but defintely notable step sequencer…. Not one of those tools with thousands of possibilities (as in many so-called “workstations”), but extremely easy to operate and to the point: 4 tracks of 16 steps, upon request with different track lengths, each track assignable … to the SSM filter, to LFO 4 speed, to the oscillator wavetable No. 29 – and one track for the melody itself … what more could you want? In addition to the sequencer there is also a flexible arpeggiator on board. With the Solaris, creativity knows no limits.
Now one highlight must be mentioned that could easily be overlooked …
Well, a keyboard up / down switch wouldn’t seem to be that spectacular. But keep in mind: Solaris is synonymous for unlimited sound potential. Four parallel synthesizers in one package, classic waveforms, a wealth of wavetables, rotors, numerous filters, 6 LFOs, 6 envelopes … and all that within the limits of a 5 octave keyboard! But is that really and truely enough? Not without good reason did Waldorf produce its legendary Wave in a 76-key version to warrant additional soundspace.
Here is where the Solaris octave switches come into their own! What makes them so unique is not the fact that they enable keyboard transposition up or down 1 or 2 octaves. The speciality lies in the fact that the current sound can be retained (press the sustain pedal or the hold button), while at the same time the surrounding octaves are transposed up or down. This embeds your sound in a choice of 9 octaves! Soup isn’t just about ingedients, it’s also about savour and spice …
Interestingly enough, the great John Bowen himself doesn’t seem to be fully aware of the usefulness of the octave buttons.
“These buttons should be self explanatory. They change the range of the keyboard, but must be pressed before you play to get the transposed values. They will not transpose keys currently held.” (Solaris User Guide, page 15)
In my opinion, the uniqueness of these buttons lies in what happens if you don’t press before playing. Play first, press “Hold” (or the sustain pedal), then shift the keyboard range up (or down) and add more notes. The sonic results are marvellous.
Lists are not very attractive, but they put things into orderly perspective. The following is a detailed list (with some explanations …) of components of the Solaris sound architecture:
For each oscillator, there is a choice between:
- MultiMode Oscillator (sine, triangle, ascending sawtooth, descending sawtooth, pulse, noise, sample & hold, morphing sawtooth, morphing pulse, “jaws” – 7 stacked sawtooth waves)
- Wavetable Oscillator (the 63 sets of Waldorf Microwave wavetables)
- CEM – Curtis Electromusic Oscillator (sawtooth, triangle, pulse, saw + triangle, triangle + pulse, saw + triangle + pulse)
- Wav – Sample Playback Oscillator (Solaris loads samples from the CompactFlash card into the RAM. There’s a total of 32MB of sample RAM)
- Vector Synthesis Oscillator (94 waveform sets in the style of the Prophet VS)
- Mini Oscillator – Minimoog Emulation (triangle, sawtooth + triangle, sawtooth, pulse 1, pulse 2, pulse 3)
All the “usual” parameters such as tuning, fine tuning, sync, shape (determining the shape of the waveform across its continuum), phase, glide and linear FM are available. In addition, you have LOW (frequency) mode, which turns oscillators into LFOs. Switching keyboard tracking off (NO TRACK-button) will give you a “fixed” pitch. CLOCK SYNC allows you to synchronize the frequency of the oscillators to divisions of the MIDI clock signal.
Rotor is a term generally associated with helicopters. As there, so here: something turns. The Solaris rotors represent sound sources additional to the oscillators. To put it simply, a rotor generates a 4-step waveform sequence in circular rotation. The sources of the rotor sounds are completely user definable. Oscillators, LFOs, filters, mixers, external audio inputs, envelopes, the sequencer rows A to D and so on: the choice is yours.
Actually, a rotor is far more than a 4-pole audio source: it may be used for control signals as well …
“Think of the Rotor as a 4-input mixer, that turns up one channel at a time. If sub-audio signals are fed into it, you won’t hear anything as a contributing component to the rotor sound for those positions.
On the Solaris plug-in, I have a rotor that is disguised – it’s called a Modulation Mixer. I used it to slowly blend LFOs. So, you could have, for example, all 4 Rotor inputs being the LFOs 1-4, and each at a different rate and shape, then use the output to modulate things – and setting the Rotor to a very slow rate, you can have subtle variations of modulation going on, but that would still be cyclical over the long run.” (John Bowen)
Back to the rotor being used for audio purposes. When the rotor is in the NO TRACK mode, it behaves like a slow-playing wave sequence. Frequency control is possible (as with any LFO). If, on the other hand, NO TRACK is disabled, the rotor functions as an oscillator – with a very unusual waveform, of course …
The entire sound material — oscillators, rotors and much more — is now fed into the …
Each mixer has four inputs. The oscillators, the two rotors, the four insert effects, even the mixers themselves, the VCAs, the filters – well, actually anything that emits a sound – can be merged with anything else. And there’s noise as an extra sound source, if you don’t want to sacrifice any of the oscillators for it. The volume of each sound source is adjustable individually. I emphasize: 4 mixers, each with 4 audio sources. That makes a total of 16 sound sources at your disposal, the level of which can be individually determined or modulated.
So, obviously the Solaris is an “open system” … the exploration of which would easily carry you far into the time of retirement (should that impress you) and beyond. We’re thinking in terms of perfect health for the next 100 years …
Solaris has four filters routable in parallel or series. Each of these filters can be set to one of the following filter types:
- MultiMode Filter: 23 (!) filter variations … LP4, LP3, LP2, LP1, HP4, HP3, HP2, HP1, BP4, BP2, BP2+LP1, BP2+LP2, BP2+HP1, BP2+HP2, BR4, BR2, BR2+LP1, BR2+LP2, BR2+HP1, BR2+HP2, AP3, AP3+LP1, AP3+HP1
- SSM Filter: A filter emulation of those SSM chips used in the Rev.1 and Rev.2 Prophets
- MINI Filter: emulation of the famous Minimoog 24dB lowpass filter
- OBIE Filter: Oberheim emulation, inspired by the SEM filter, it’s a 2-pole 12dB filter with LowPass, HighPass, BandPass and BandReject (Notch)
- COMB Filter: This adds a delayed copy of a signal to itself, in either a feed-forward or feed-back loop. It creates distortions, resulting in a frequency response that looks much like a comb.
- VOCAL Filter: A formant filter, which definitely sounds very excellent. A great asset, especially in combination with the joystick. The five vowels can be morphed (moved (o;) in realtime …
4 “VCAs” (in reality: 5 stereo amplifiers)
As explained above, “VCA” is not correct, but we’ll stick to the label as Bowen did. We know they are in fact digital amplifiers.
“There are actually five stereo amplifiers – the 5th one is at the end of the sound chain, just before the effects section.” (John Bowen).
Each of the 4 main VCAs accepts an input signal from either its corresponding filter or Insert FX module. The following VCA parameters can be tweaked: Input (filter, insert FX), Type (linear, logarithmic, sigma curve), Boost (soft distortion), Level (volume) and InitPan (panorama position). There are also two modulation inputs. Source 1 modulates the amplifier’s level, Source 2 modulates the pan position. Many of the attached Solaris demos make extensive use of the VCA’s panorama modulation.
Solaris has 4 main LFOs and a special vibrato LFO. Each LFO supports the common waveforms (sine, triangle, ramp, etc.) plus sample & hold, of course. Frequency is adjustable between 0.000 Hz and 500.000 Hz (audio range). There’s also a parameter page with Delay, Fade In and Fade Out for smooth (“natural”) modulation. The LFOs can be synched to MIDI Clock. Ah, yes … and the LFO speed may be modulated by any of the dozens of modulation sources. By the envelopes, e.g., to get those great Yamaha CS-80 sound effects. Two of the attached sound examples refer to this … they demonstrate LFO speed modulation by EG 6 … Listen to the samples, it’s worthwhile.
6 Envelopes (in reality: 7 envelopes)
Let’s not be petty: Envelopes you need. It’s nice that John Bowen chose “classic” ADSR envelopes. A clearly structured ADSR is, in my opionion, the most practical tool for your musical requirements (easily topping 8-stage envelopes, in that respect). As we know from Oberheims Xpander/Matrix-12, all envelope parameters are voltage controllable. Very nice. Well, the ideal Solaris would probably feature real hardware envelopes (and true VCAs). Nevertheless – these digital envelopes are absolutely OK. Envelope segment values range from 0.0 ms to 20.0 seconds. Good for snappy electronic sounds … and excellent for all types of pads, evolving string sounds, etc. In addition to the 6 ADSR envelopes there is a loopable 8-stage envelope — for those among you requiring really complex time structures …
And now a simple list of additional Solaris features, since their detailled description is clearly beyond the scope of the report:
- 4-Track Step-Sequencer
- 4 Effect Channels
- Loopable EG
- Vector Synthesis
- Amplitude Modulation
- Key Tables
- 4 Lag Processors
- Envelope Follower
Excellent grooves, ring modulation effects, individual key tables, synchronization of effects (delay) and MIDI clock are among the additional features we’re talking about.
A little more performance …
By the way, the bottom five knobs below the graphic display can be completely freely assigned. Concerning the Assignable Performance Knobs, the essential point is that the user doesn’t have to leave preset mode to make adjustments. Just carry on on the waves of your musical inspiration, tweaking a knob now and then.
This goes for the ASSIGN buttons, too. (I first came across this fine feature while working with the Ensoniq TS-12.) The two ASSIGN buttons allow variation of the sound in progress at the press of a finger. Here choices include Keyboard Glide on/off, Oscillator Glide on/off, Seq start/stop, Arp start/stop and Arp transpose. When selected in the Mod Source list (see below), the ASSIGN buttons generate full value (MaxValue) when pressed and zero value when not.
The four ENABLE PART buttons are also worth mentioning. Since the Solaris is permanently in Multi-Mode (meaning up to four sounds make one “sound”), you can disable or mute each individual sound component “on the run”, while you’re actually playing. It’s a system of musical building blocks: pile sounds on, pull sounds off — until you’ve got the building you want.
A little hint concerning knob acceleration: Press SHIFT to speed-control movements. This can be a real help when you’re programming LFO frequencies, for example. If you want rapid changes, you can supersede the fine adjustment by simultaneously pressing SHIFT.
It’s not just about programming with Solaris. Programming and Performance go hand in hand!
Since the oscillators, mixers, insert effects, filters, LFOs and VCAs may be modulated in many parameters, the list of the modulation sources is of great importance.
- LFO 1-4
- Vibrato LFO
- Envelopes 1-6
- Looping EG’s X axis
- Looping EG’s Y axis
- Note (MIDI note number)
- Modulation Wheel
- AT + ModWheel (sum of the two)
- Ribbon 1
- Ribbon 2
- Joystick X axis
- Joystick Y axis
- CC1-CC5 (user defined controllers)
- Sequencer tracks A to D
- Pedals 1/2
- Assign Buttons 1/2
- Envelope Follower
- Key Tables 1-4
- Poly Aftertouch (via MIDI, unfortunately the keyboard’s AT is only monophonic)
- Lag Processors 1-4
- Breath Controller
- OSC 1-4
- Rotor 1/2
- AM 1/2
- Vector 1/2
- Mixer 1-4
- Filters 1-4
- InsFX 1-4
- VCA 1-4
- White Noise
- Pink Noise
- Ext 1-4
- SPdifL / SPdifR (S/PDIF)
The envelope parameters can only be modulated by velocity, key tracking, the individually assignable modulation wheel and the controllers CC1 to CC4. But that’s more than enough …
Memory – the importance of the Compact Flash card
Please note: Unlike most other synthesizers on the market, the Solaris has no internal memory. All sound-, sample- and sequencer-data (and the OS) is saved on the supplied Compact Flash (CF) card. So the importance of this Compact Flash card is obvious. The bad news: the loss of the card would be a minor catastrophy, its consequences difficult to estimate. The good news: storing back-ups of that vital CF card on your computer is very simple. The cards are cheap, too, so the purchase of a second one and the creation of a duplicate is in no relation to the risk of complete loss. We’re talking about an investment of a few extra Euros/Dollars …
“Another thing I like to point out – you have your entire Solaris contents on the CF card, so you can take just your card to another place that also has a Solaris (studio, friend’s house) – insert your CF card, and voila! You have it just as if you had packed and brought your own Solaris keyboard with you!” (John Bowen)
Solaris and the local heavy weight JD-800
20 sounds! On the first night with my Solaris I created 20 sounds of my own. It’s always a good sign if you can quickly and easily create sounds on a synthesizer of this complexity. It clearly speaks for the musical instrument.
Straightaway, the Solaris had replaced my favourite polyphonic of 20 years (the Roland JD-800). Even tho’ the JD-800 still sounds warmer (being simply unique in this respect – why, I do not know), the Solaris opens entirely new worlds with its masses of sound material.
Working with wavetables is a real delight, something I would hardly have imagined up till now. The combination of traditional (sawtooth) string sounds with a touch of wavetable is particularly appealing. Above all, I would like to emphasize the numerous performance-oriented controls. The joystick is noteworthy. Its X and Y position are available in most modulation source lists. It allows for simultaneous real time control of multiple filter frequencies, LFO speeds, oscillator tunings etc.
Since the JD-800 has already served as a comparison, I would like to proceed with comparisons based on the Alesis Andromeda — a high quality (analog!) instrument, state of the art. In contrast to the Andromeda, however, the Solaris is a hand and a foot ahead. The instrument is completely navigable from the very first (!) minute.
The user knows exactly where he is, what he has done, what he is in the process of doing, and what his next steps must be in order to achieve the sound he is going for. These are things I have never managed to this point of perfection with the Andromeda.
The user knows exactly where he is, what he has done, what he is in the process of doing, and what his next steps must be in order to achieve the sound he is going for. These are things I have never managed to this point of perfection with the Andromeda.
The Solaris is a synthesizer in the best sense of the word. Minimal conceptual shortcomings (such as the external power supply and the tedious process required for saving and naming new memory locations) can be overlooked. The crucial point is the musical potential. A multitude of sound options, intuitive user interface and superb performance features make the Solaris a milestone in synthesizer history.
With Solaris, his life’s work, John Bowen has created an in-depth musical instrument.
In connection with the audio files, please note: These contain 50 (!) minutes of music. Everything is Solaris “pure” — no external effects, no additional sequencer, not even MIDI — with the necessary exception of a recording tool (freeware Audacity), which served for basic recording and sound mixing.
Elkas masterkeyboard MK88 was used in two soundfiles (“polyphonic aftertouch”) for variation of Solaris filter frequencies and LFO speeds, based on independent key pressures. (No knobs were tweaked, it’s all “finger control”).
John Bowen Solaris
Polyphonic digital synthesizer
Price: approx 3900 Euros / 4100 USD
Review by Robert Wittek
Interview with John Bowen
Audio-Workshop by Robert Wittek:
- Audio Part 1 (… short introduction in German)
- Audio Part 2
- Audio Part 3
- Audio Part 4
- Audio Part 5
- Audio Part 6
> So you find the Solaris easier to navigate and create sounds on than the Schmidt?
Yes, absolutely. The Solaris offers 6 displays, each with its own direct-access knobs. Clear workflow (soundwise, all you have to do is switch between the inividual MAIN and MOD pages, that’s it) and an equally clear signal path. I owned and knew the Oberheim Xpander before, so perhaps this was a little help when getting the Solaris …
All the lights and knobs on the Schmidt are only of limited help when it comes to synth programming. Admittedly, the crowded panel is impressive to look at and the knobs are nice to tweak when creating a sound “from scratch”. But those hundreds of elements give you only little information about their individual status when calling up presets / memory sounds. You have to check the panel extremely carefully (and consult the right-hand display permanently) in order to get an idea what’s going on. No chance to analyze an in-depth Schmidt sound within a minute or so. All in all I’d call it the “Andromeda Effect”: vast sonic possibilities, but limited fun factor, and at the end possibly more frustration than impressive musical results.
Thanks for the great review Theo.
Have you had a chance to play the Studio Electronics Omega 8 or Code 8? It seems like it would be the perfect analog complement to the Solaris. Is that the dream team?
Hi David. Sadly no – I never had the chance to play one of those great SE instruments. You’re right – it sounds like the perfect dreamteam!
love synth sounds
A polysynth with this pricetag should be multitimbral, or, at least, bi-timbral. Hardly an “expert” instrument in its current form.
You’re right – bi-timbral would be great. Well, the John Bowen Solaris is in “permanent” 4-layer-mode. Just like the Roland JD-800. This is “sort of” multi-timbral, although it’s not different sound paths, each with its own MIDI channel. One of the next main OS updates will hopefully bring “true” multi-timbrality. It’s at least in discussion, as far as I know …
Anyway, I think professional “sound” is what a pro-instrument is about. Up to now, none of the virtual hardware-synths comes close to the Solaris …
Not trying to be difficult, but I never let spec or looks or ‘features’ sway me with synths (any more). It has to be about the pure core sound. It’s literally the only thing that really matters in a song and often even simple sounds are better for real music.
With that said, I sat here and went through each of your sound clips for the Solaris. I didn’t like any of them. They have the typical, thin, crispy, gutless digital sound (esp when trying to mimic analog), and the arpeggios etc lack bite and punch, just not a sound I think is very good at all. As complex as I’m sure it can get (and I’ve had complex synths like V-Synth and SY99 and loved them for it but not vs my Prophet 6 and JD-800!).
Mentioning JD-800, as you did, well I again went through each sound in your clips list for solaris and then played a sound on my JD-800… wow, the JD-800 sounds AWESOME, very very warm, very musical, inspiring, beautiful. Not one sound on the Solaris clips could compete.
I then did the same with my Prophet 6 (my other favourite poly along with JD-800), and again, the Prophet 6 (once you know how to shape the sounds well) blew the solaris away. Deep, thick, warm, rich and punchy. JD-800 and Prophet 6 have a little crossover (bandpass/high pass resonant sweeps for example of which they are hands down 2 of the best ever machines for that!) but other than that they are quite different, and complimentary, and IDEAL pairing imo.
The Solaris stood out like a sore thumb as nothing useful sonically, jarring, ‘ugly’ and weak sound. I think the synth is overhyped and over-rated, much like the modal synths (inc the analog 008 not just the 002). These are technically impressive machines, like Andromeda, filled (apparently) with worlds of sounds, yet all those sounds, esp the more usual sounds you actually need in music most often, just sound bad/harsh/grainy/thin. Prophet 6 > Andromeda in every musical and interface respect, and JD-800 beats Solaris on tone. So I wouldn’t throw away your JD-800 just yet as You’ll regret it (many have sold 800s then regretted it!). Pair a beautiful (best ever for musicality/sound/interface) digital like JD-800 up with a very rich/powerful but not stupidly over the top with features like Prophet 6 and you have ALL the poly synth you need… for stuff like solaris you go to soft synths, but soft synths absolutely do not replace JD-800 or Prophet 6, no matter what anyone with bad hearing and lack of experience of many, many synths (such as you and I) says. Especially the Prophet 6 can not be replaced, but repro 5 (nice for digital but a joke as an ‘analog’) and even JD-800 has that real magic that just doesn’t cut it in software.
Solaris, like its sounds, leaves me cold. No thanks!
“Especially the Prophet 6 can not be replaced, but repro 5 (nice for digital but a joke as an ‘analog’) and even JD-800 has that real magic that just doesn’t cut it in software.”
Is meant to say
Prophet 6 can not be replaced BY repro 5 (it has no ‘magic’), JD-800 has that magic, for some reason I’ve still not worked out being as it’s ‘only’ digital and ‘only’ PCM. Roland made one hell of a unique synth with the JD-800!
“Solaris List Price (updated 2017):
€ 3,890.– (including 19% VAT)
$ 4,199.– (without tax; Washington state customers add 9.5%)”
Terrible prices, that sound is bad. You could honestly get those sounds in a soft synth.
I ask again, for this price you could buy a Prophet 6 *AND* A JD-800 (used)… and you have real, musical beauty. Not just a load of spec in a box. Also overly complex synths in general are just a buzzkill when trying to get on with real music.
… thanks for the in-depth comment(s). I know quite a few people who feel like you, who just can’t do with a Solaris. I also know quite a few Solaris owners who would never let their synth go. Interesting: either you hate it, or you love it. Seems as if there’s nothing in between.
About the price: 4000+ USD is a lot – sure. Anyway: Knowing the story of how long it took to make the Solaris become reality, and knowing of the instrument’s potential power (regardless whether you like the sound character or not), the price is “fair”. That’s my opinion.
PS: And you’re right – Roland JD-800 and Prophet-6 have that real magic software just can’t reproduce.
Very nice review, as always.
Now that time has passed, I wonder how it compares to the Quantum – I’m not found of what I’ve heard here and there on the interweb from the Modal but then, I’m not a fan of PPG’s kinda signature sounds and I mostly heard them rather than hybrid ones, if that makes any sense.
Quantum too has the great workflow-both screeny & knobby UI-luxury factors to start with.
I think it’s long overdue to update this review that, with the latest 2.0 firmware, Solaris is now 4-part multitimbral and has 2 new oscillator types! It also now comes with OLED displays, although that did increase the price, understandably. Now that it’s a decade later, do you still own your 2 Solaris’s and do you still feel the same about it? With the explosion in analog and digital synths the past decade, it has some tough competition for the money, i.e. Hydrasynth, Quantum, Summit, etc and even Prophet 10 which is of course considered by many to be the holy grail of analog polysynths. However, I don’t think anyone buys a Solaris with the intent to only use its VA engine and to just be an emulator of an analog synth. Anyway, to you, where does the Solaris stand among all of these? Unlike almost all synthesizers, updates and upgrades continue to be in the works, but only because it has a community willing to make a continued investment, which is explained below.
A buyer has to keep in mind is that the Solaris is not made from a company like Korg or Behringer that has bankrolled employees and massive supply chains. As such, a prospective buyer must consider the fact that future updates may require a donation to the developer, which is the only way that they’re paid. When 2.0 was released, owners were required to make a donation to the 2.0 developer in order to get the update, and the developer put in countless hours to finish it. It’s really the only way updates are possible. Even then, considering the hours put in, the developers still don’t get full compensation for their efforts, so it’s a sacrifice. I don’t think John Bowen takes a penny of the donations, either. For new buyers, currently a minimum $60 donation is required to get into the 2.0 firmware forum. Again, I don’t think John Bowen takes a cut of this at all. To me, it’s worth it considering that this is the only way the Solaris has been able to grow and will continue to grow. A small price to pay!
Hey Jeff … correct and complete in all important points. The Solaris has been developed further and our review urgently needs an update. I still own two Solaris (both colors, though none of them with new OLED display) and will hopefully purchase firmware 2.0 in the near future. Again, a review update will follow … Regards – Theo