<\/p>\n T<\/span>he Solaris\u2019 enormous musical potential is no accident. As the first ‘official’ demonstrator for Moog, as co-founder of the Prophet-5, as part of the team that developed vector synthesis (the actual concept for VS came from Chris Meyer) and due to his decades of experience in playing instruments and programming factory sounds \u2013 Bowen has been able to contribute his vast knowledge to the development of the Solaris. Above all, Bowen is a real musician<\/em>. All this is reflected in many details and in the user-friendly Solaris concept.<\/p>\n M<\/span>any years ago I realized that the polyphonic analog synthesizers of the late 70s and early 80s had ushered in their own demise. Polymoog, OB-X, ARP Quadra, Prophet-5, Rhodes Chroma, Memorymoog, Yamaha CS-80 and PPG Wave 2.2 … many of those instruments never left the prototype status, strictly speaking (you\u2019ll pardon my slight exaggeration). Only a few instruments were actually “very” reliable, such as the Roland Jupiter-8 or Oberheim OB-8. Well-to-do musicians often had several units of the same instrument with them on tour, a prophylactic measure against the all-too-common technical failures. Vintage polyphonic synthesizers were (and are!) simply unreliable … and they\u2019ve always been very expensive.<\/p>\n Today, skilled technicians have been able to bring some of those instruments up to the technical standards that would have been very desirable 30 years ago. Sophisticated services and major modifications on the Rhodes Chroma or Memorymoog, e.g., have refined these instruments to a high degree (although this, by very modern standards, is unfortunately still “limited”).<\/p>\n Anyway, no wonder the appearance of digital in the mid 80s was so overwhelming. In addition to an increase in polyphonic options, the digital instruments were significantly cheaper, more compact and more<\/em> reliable<\/em> as well.<\/p>\n But that\u2019s not the end of the story. Digital synthesizers had (and still have) other limitations. Many of them are in some way inoperable, their dynamic ranges unspectacular, a lack of musical quality in their sounds, etc. Programming Yamaha\u2019s FM was (and is) not everyone’s cup of tea, ditto for Casio\u2019s phase distortion (a mysterious handling of envelope parameters). And working with sampled sounds has led to a lot of thoughtless playback-music. What we needed was intelligent sound programming! The typical manufacturers\u2019 strategy (we\u2019re talking about Roland, Yamaha, \u2026) was to try to compensate for the lack of programming options by offering an even larger contingent of sounds (thousands of sounds, which is a horror when one thinks about it).<\/p>\n Many digital synthesizers are miles away from being musician\u2019s instruments, a situation little changed today (with exceptions few and far between). Keep in mind, we\u2019re talking about “polyphonic” synthesizers! Although the industry has tried to make the use of the instruments more palatable in recent years with the addition of a few buttons and sliders, the creative potential of the \u201cuser-friendly\u201d instruments has not significantly increased. Ultimately, most digital polyphonic synthesizers are nothing but sophisticated sample players. A Renault R4 with a Porsche emblem on the hood, if you will.<\/p>\n John Bowen’s Solaris closes this gap. Although purely digital, it\u2019s a programmers\u2019 instrument, a music synthesizer for musicians. Solaris offers direct access to the entire sound structure, it invites you to create your own sounds \u201cstarting from scratch”, that is, with the oscillators \u2026. The Solaris offers no piano, guitar or saxophone samples (you can load appropriate samples if you absolutely have to<\/em>)! The instrument has enormous creative potential, fantastic performance features and thus provides a real synthesizer in the most beautiful and best sense of the word. Above all, the emitted sound quality is excellent.<\/p>\n John Bowen Solaris Synthesizer<\/p><\/div>\n Correctly speaking, Alesis Andromeda, Jomox SunSyn and a very few other instruments have closed part of the gap between vintage and modern polyphonic synthesizers during the last 15 years. But the Solaris\u2019 extremely comprehensive sound architecture (wavetables, etc.) is clearly a giant step ahead \u2026<\/p>\n R<\/span>arely have I longed for the development of an instrument as much as for that of the Solaris. Well, good things come to those who wait. In this case, it was a long wait: From the first announcement to the final model, it has now been several years. John Bowen had some bitter setbacks to deal with, followed by forced breaks when he had to refinance the instrument. But Bowen’s persistence has paid off: The sophisticated and versatile Solaris will be a momentous success.<\/p>\n T<\/span>he first contact with my Solaris brought some surprises. The instrument was easily unpacked – solid cardboard, foil to protect the instrument – as should be. It initially felt good, stable and robust. But there was this additional little packet in the box with – hold on here \u2013 an external power supply! At least it was a very efficient and power-saving power supply, or so it said in the directions. True, the big advantage of external power supplies is that there is no significant heat development inside the instrument, a fact I always find reassuring. And, should the transformer be faulty, this could be replaced without sending the whole Solaris off for repairs. But the fact remains, that external power supplies are not a very elegant solution!<\/p>\n John Bowen Solaris Synthesizer<\/p><\/div>\n “Yes, the power supply is outside of the synth. This avoids noise in the audio, and makes things simpler in the production.”<\/em> (John Bowen in his Solaris User Guide p. 9)<\/p>\n Well, that’s true.<\/p>\n Let’s stay with the hardware and some of the finer things in life. The Solaris keyboard is \u2013 how else could it be – excellent. The feel is good. Also excellent the joystick, the display, the buttons and knobs. Or maybe \u201csatifactory\u201d is more accurate here, for two reasons. First, we all know that the hardware of the noble 70s and early 80s cannot be matched today. Second, Solaris production (currently in Germany) has not yet banned minor weaknesses. Pitch wheels without properly closing zero points and other such irritations are an indication that the production still has potential for improvement. As John Bowen and his team are on their toes, such shortcomings should be remedied soon.<\/p>\n Let\u2019s continue with the hardware. There\u2019s a huge choice of rear panel connections: 8 individual outputs, four independent inputs (although only monophonic) and USB, S\/PDIF, MIDI plus two pedal inputs and a Compact Flash card slot.<\/p>\n Due to what John Bowen calls \u201cold school\u201d layout and control (the Oberheim Matrix-12 and Xpander probably served as models), quick and precise programming is innate to the instrument. As with the Oberheims, the Solaris programming is divided into “Pages”. The MAIN page is all about oscillators, waveforms, pitch (> oscillator section) and filters, filter types, frequencies and resonance settings (> filter section), etc. Pressing the MODulation button brings up the associated MOD page. This principle is the same throughout the signal path (OSCs, LFOs, Filters, VCAs, ENVs …) \u2013 everything very precise and extremely user friendly …!<\/p>\n John Bowen Solaris Synthesizer<\/p><\/div>\n C<\/span>oncerning the instrument\u2019s polyphonic potential, a precise assessment is difficult. We have no exact information on how many voices the Solaris has. But speaking from practical experience, there are hardly too few voices. Notes may be capped when playing fat clusters if release time is set to a maximum of 20 seconds. Obviously, polyphony depends on processor performance (\u2026 the power plant inside the Solaris consists of six state of the art third-generation SHARC DSP processors).<\/p>\n \u201cEven with a complex program utilizing all four oscillators, four filters, four mixers and healthy doses of modulation, you can still expect 10 note polyphony!\u201d<\/em> (www.johnbowen.com<\/a>)<\/p>\n You will probably have little reason to fully realise the Solaris potential at hand. A two- or three-part sound will generally fulfill all of your needs. As a rule of thumb and in my opinion, the Solaris will place 10 to 20 voices at your disposal. When I asked him, John was more cautious: \u201c\u2026 for now it is fixed at 10 voice polyphony.\u201d<\/em> (John Bowen)<\/p>\n John Bowen Solaris Synthesizer<\/p><\/div>\n N<\/span>ow things get interesting. The bottom line is musical quality, the most central question about an instrument. Sound and performance stand in direct relation to each other and should be dealt with together. A good sound requires immediate access and user-friendly tools.<\/p>\n With Solaris you have four parallel synthesizers (“parts”) in one package, which means many oscillators, many waveforms, a myriad of mixers and filters, countless envelopes and first-class modulation possibilities. Enough to keep you investigating new sounds for at least the next 20 to 30 years. Now to the crux of the matter: the Solaris sound quality results from, among other things, a surprisingly wide dynamic range potential. Herein lies the central weakness of most digital synthesizers \u2013 they may sound brilliant, but at the cost of reduced dynamic flexibility. They always sound a little “flat”. The dynamic flexibility of a single analog voice, from say a Minimoog or a Pro-One, is capable of bringing any digital sound to its knees.<\/p>\n A musician friend recently reported from Munich that a brand new Roland Fantom keyboard used at a rock concert had no chance in the mix, whereas the little antique Moog Satellite squatting next to it came through clearly.<\/p>\n Originally, I had exactly these concerns regarding the Solaris. Digital is digital, there\u2019s no way around that \u2013 and a VCA is the only thing that allows for wide dynamic range. However, the Solaris dynamic potential is impressive. Probably as good as can be had on a digital basis. Incidentally, don\u2019t let the label “VCA” confuse you. It\u2019s just not true. John has confirmed my suspicions:<\/p>\n “Sorry, the Solaris is all digital. Originally I had the word amp instead of VCA, which I guess we should have left there, but I kept calling them VCAs, so we changed it. Think “V<\/strong>irtually C<\/strong>ontrolled A<\/strong>mplifier” ;-)<\/em> (John Bowen)<\/p>\n John Bowen Solaris Synthesizer<\/p><\/div>\n In the Solaris, extensive sound material meets high sound potential, and the two encounter remarkable performance potential: A weighted (grippy) keyboard, assignable wheels, a joystick, a multiple zone ribbon controller, etc … These are the decisive ingredients for good sound performance. In addition, there is that small but defintely notable step sequencer\u2026. Not one of those tools with thousands of possibilities (as in many so-called “workstations”), but extremely easy to operate and to the point: 4 tracks of 16 steps, upon request with different track lengths, each track assignable … to the SSM filter, to LFO 4 speed, to the oscillator wavetable No. 29 – and one track for the melody itself … what more could you want? In addition to the sequencer there is also a flexible arpeggiator on board. With the Solaris, creativity knows no limits.<\/p>\n Now one highlight must be mentioned that could easily be overlooked …<\/p>\n W<\/span>ell, a keyboard up \/ down switch wouldn\u2019t seem to be that<\/em> spectacular. But keep in mind: Solaris is synonymous for unlimited sound potential. Four parallel synthesizers in one package, classic waveforms, a wealth of wavetables, rotors, numerous filters, 6 LFOs, 6 envelopes … and all that within the limits of a 5 octave keyboard! But is that really and truely enough? Not without good reason did Waldorf produce its legendary Wave in a 76-key version to warrant additional soundspace.<\/p>\n Here is where the Solaris octave switches come into their own! What makes them so unique is not the fact that they enable keyboard transposition up or down 1 or 2 octaves. The speciality lies in the fact that the current sound can be retained (press the sustain pedal or the hold button), while at the same time the surrounding octaves are transposed up or down. This embeds your sound in a choice of 9 octaves! Soup isn\u2019t just about ingedients, it\u2019s also about savour and spice …<\/p>\n John Bowen Solaris Synthesizer<\/p><\/div>\n Interestingly enough, the great John Bowen himself doesn\u2019t seem to be fully aware of the usefulness of the octave buttons.<\/p>\n “These buttons should be self explanatory. They change the range of the keyboard, but must be pressed before you play to get the transposed values. They will not transpose keys currently held.\u201d<\/em> (Solaris User Guide, page 15)<\/p>\n In my opinion, the uniqueness of these buttons lies in what happens if you don\u2019t<\/em> press before playing. Play first, press “Hold” (or the sustain pedal), then shift the keyboard range up (or down) and add more notes. The sonic results are marvellous.<\/p>\n L<\/span>ists are not very attractive, but they put things into orderly perspective. The following is a detailed list (with some explanations …) of components of the Solaris sound architecture:<\/p>\n F<\/span>or each oscillator, there is a choice between:<\/p>\n John Bowen Solaris Synthesizer<\/p><\/div>\n All the “usual” parameters such as tuning, fine tuning, sync, shape (determining the shape of the waveform across its continuum), phase, glide and linear FM are available. In addition, you have LOW (frequency) mode, which turns oscillators into LFOs. Switching keyboard tracking off (NO TRACK-button) will give you a “fixed” pitch. CLOCK SYNC allows you to synchronize the frequency of the oscillators to divisions of the MIDI clock signal.<\/p>\n R<\/span>otor is a term generally associated with helicopters. As there, so here: something turns. The Solaris rotors represent sound sources additional to the oscillators. To put it simply, a rotor generates a 4-step waveform sequence in circular rotation. The sources of the rotor sounds are completely user definable. Oscillators, LFOs, filters, mixers, external audio inputs, envelopes, the sequencer rows A to D and so on: the choice is yours.<\/p>\n Actually, a rotor is far more than a 4-pole audio source: it may be used for control signals as well …<\/p>\n John Bowen Solaris Synthesizer<\/p><\/div>\n \u201cThink of the Rotor as a 4-input mixer, that turns up one channel at a time. If sub-audio signals are fed into it, you won\u2019t hear anything as a contributing component to the rotor sound for those positions.<\/em><\/p>\n On the Solaris plug-in, I have a rotor that is disguised \u2013 it\u2019s called a Modulation Mixer. I used it to slowly blend LFOs. So, you could have, for example, all 4 Rotor inputs being the LFOs 1-4, and each at a different rate and shape, then use the output to modulate things \u2013 and setting the Rotor to a very slow rate, you can have subtle variations of modulation going on, but that would still be cyclical over the long run.\u201d<\/em> (John Bowen)<\/p>\n Back to the rotor being used for audio purposes. When the rotor is in the NO TRACK mode, it behaves like a slow-playing wave sequence. Frequency control is possible (as with any LFO). If, on the other hand, NO TRACK is disabled, the rotor functions as an oscillator – with a very unusual waveform, of course …<\/p>\n John Bowen Solaris Synthesizer<\/p><\/div>\n The entire sound material \u2014 oscillators, rotors and much more \u2014 is now fed into the …<\/p>\n E<\/span>ach mixer has four inputs. The oscillators, the two rotors, the four insert effects, even the mixers themselves, the VCAs, the filters \u2013 well, actually anything that emits a sound \u2013 can be merged with anything else. And there\u2019s noise as an extra sound source, if you don\u2019t want to sacrifice any of the oscillators for it. The volume of each sound source is adjustable individually. I emphasize: 4 mixers, each with 4 audio sources. That makes a total of 16 sound sources at your disposal, the level of which can be individually determined or modulated.<\/p>\n So, obviously the Solaris is an “open system” … the exploration of which would easily carry you far into the time of retirement (should that impress you) and beyond. We\u2019re thinking in terms of perfect health for the next 100 years …<\/p>\n S<\/span>olaris has four filters routable in parallel or series. Each of these filters can be set to one of the following filter types:<\/p>\n John Bowen Solaris Synthesizer<\/p><\/div>\n A<\/span>s explained above, \u201cVCA\u201d is not correct, but we\u2019ll stick to the label as Bowen did. We know they are in fact digital amplifiers.<\/p>\n “There are actually five stereo amplifiers – the 5th one is at the end of the sound chain, just before the effects section.”<\/em> (John Bowen).<\/p>\n Each of the 4 main VCAs accepts an input signal from either its corresponding filter or Insert FX module. The following VCA parameters can be tweaked: Input (filter, insert FX), Type (linear, logarithmic, sigma curve), Boost (soft distortion), Level (volume) and InitPan (panorama position). There are also two modulation inputs. Source 1 modulates the amplifier\u2019s level, Source 2 modulates the pan position. Many of the attached Solaris demos make extensive use of the VCA\u2019s panorama modulation.<\/p>\n S<\/span>olaris has 4 main LFOs and a special vibrato LFO. Each LFO supports the common waveforms (sine, triangle, ramp, etc.) plus sample & hold, of course. Frequency is adjustable between 0.000 Hz and 500.000 Hz (audio range). There\u2019s also a parameter page with Delay, Fade In and Fade Out for smooth (\u201cnatural\u201d) modulation. The LFOs can be synched to MIDI Clock. Ah, yes … and the LFO speed may be modulated by any of the dozens of modulation sources. By the envelopes, e.g., to get those great Yamaha CS-80 sound effects. Two of the attached sound examples refer to this … they demonstrate LFO speed modulation by EG 6 … Listen to the samples, it’s worthwhile.<\/p>\n John Bowen Solaris Synthesizer<\/p><\/div>\n L<\/span>et\u2019s not be petty: Envelopes you need<\/em>. It\u2019s nice that John Bowen chose “classic” ADSR envelopes. A clearly structured ADSR is, in my opionion, the most practical tool for your musical requirements (easily topping 8-stage envelopes, in that respect). As we know from Oberheims Xpander\/Matrix-12, all envelope parameters are voltage controllable. Very nice. Well, the ideal Solaris would probably feature real hardware envelopes (and true VCAs). Nevertheless – these digital envelopes are absolutely OK. Envelope segment values range from 0.0 ms to 20.0 seconds. Good for snappy electronic sounds … and excellent for all types of pads, evolving string sounds, etc. In addition to the 6 ADSR envelopes there is a loopable 8-stage envelope \u2014 for those among you requiring really complex time structures …<\/p>\n John Bowen Solaris Synthesizer<\/p><\/div>\n A<\/span>nd now a simple list of additional Solaris features, since their detailled description is clearly beyond the scope of the report:<\/p>\n Excellent grooves, ring modulation effects, individual key tables, synchronization of effects (delay) and MIDI clock are among the additional features we\u2019re talking about.<\/p>\n John Bowen Solaris Synthesizer<\/p><\/div>\n B<\/span>y the way, the bottom five knobs below the graphic display can be completely freely assigned. Concerning the Assignable Performance Knobs, the essential point is that the user doesn\u2019t have to leave preset mode to make adjustments. Just carry on on the waves of your musical inspiration, tweaking a knob now and then.<\/p>\n This goes for the ASSIGN buttons, too. (I first came across this fine feature while working with the Ensoniq TS-12.) The two ASSIGN buttons allow variation of the sound in progress at the press of a finger. Here choices include Keyboard Glide on\/off, Oscillator Glide on\/off, Seq start\/stop, Arp start\/stop and Arp transpose. When selected in the Mod Source list (see below), the ASSIGN buttons generate full value (MaxValue) when pressed and zero value when not.<\/p>\n John Bowen Solaris Synthesizer<\/p><\/div>\n The four ENABLE PART buttons are also worth mentioning. Since the Solaris is permanently in Multi-Mode (meaning up to four sounds make one “sound”), you can disable or mute each individual sound component \u201con the run\u201d, while you\u2019re actually playing. It\u2019s a system of musical building blocks: pile sounds on, pull sounds off \u2014 until you\u2019ve got the building you want.<\/p>\n A little hint concerning knob acceleration: Press SHIFT to speed-control movements. This can be a real help when you\u2019re programming LFO frequencies, for example. If you want rapid changes, you can supersede the fine adjustment by simultaneously pressing SHIFT.<\/p>\n It\u2019s not just about programming with Solaris. Programming<\/em> and Performance<\/em> go hand in hand!<\/p>\n John Bowen Solaris Synthesizer<\/p><\/div>\n S<\/span>ince the oscillators, mixers, insert effects, filters, LFOs and VCAs may be modulated in many parameters, the list of the modulation sources is of great importance.<\/p>\n The envelope parameters can only be modulated by velocity, key tracking, the individually assignable modulation wheel and the controllers CC1 to CC4. But that\u2019s more than enough …<\/p>\n John Bowen Solaris Synthesizer<\/p><\/div>\n P<\/span>lease note: Unlike most other synthesizers on the market, the Solaris has no<\/em> internal memory. All sound-, sample- and sequencer-data (and the OS) is saved on the supplied Compact Flash (CF) card. So the importance of this Compact Flash card is obvious. The bad news: the loss of the card would be a minor catastrophy, its consequences difficult to estimate. The good news: storing back-ups of that vital CF card on your computer is very simple. The cards are cheap, too, so the purchase of a second one and the creation of a duplicate is in no relation to the risk of complete loss. We\u2019re talking about an investment of a few extra Euros\/Dollars …<\/p>\n John Bowen Solaris CF-Card<\/p><\/div>\n “Another thing I like to point out – you have your entire Solaris contents on the CF card, so you can take just your card to another place that also has a Solaris (studio, friend’s house) – insert your CF card, and voila! You have it just as if you had packed and brought your own Solaris keyboard with you!<\/em>” (John Bowen)<\/p>\n 20<\/span> sounds! On the first night with my Solaris I created 20 sounds of my own. It\u2019s always a good sign if you can quickly and easily create sounds on a synthesizer of this complexity. It clearly speaks for the musical instrument.<\/p>\n Straightaway, the Solaris had replaced my favourite polyphonic of 20 years (the Roland JD-800<\/a>). Even tho\u2019 the JD-800 still sounds warmer (being simply unique in this respect – why, I do not know), the Solaris opens entirely new worlds with its masses of sound material.<\/p>\n John Bowen Solaris Synthesizer<\/p><\/div>\n Working with wavetables is a real delight, something I would hardly have imagined up till now. The combination of traditional (sawtooth) string sounds with a touch of wavetable is particularly appealing. Above all, I would like to emphasize the numerous performance-oriented controls. The joystick is noteworthy. Its X and Y position are available in most modulation source lists. It allows for simultaneous real time control of multiple filter frequencies, LFO speeds, oscillator tunings etc.<\/p>\n Since the JD-800 has already served as a comparison, I would like to proceed with comparisons based on the Alesis Andromeda \u2014 a high quality (analog!) instrument, state of the art. In contrast to the Andromeda, however, the Solaris is a hand and a foot ahead. The instrument is completely navigable from the very first (!) minute.<\/p>\n The user knows exactly where he is, what he has done, what he is in the process of doing, and what his next steps must be in order to achieve the sound he is going for. These are things I have never managed to this point of perfection with the Andromeda.<\/p>\n John Bowen Solaris Synthesizer<\/p><\/div>\n The user knows exactly where he is, what he has done, what he is in the process of doing, and what his next steps must be in order to achieve the sound he is going for. These are things I have never managed to this point of perfection with the Andromeda.<\/p>\n T<\/span>he Solaris is a synthesizer in the best sense of the word. Minimal conceptual shortcomings (such as the external power supply and the tedious process required for saving and naming new memory locations) can be overlooked. The crucial point is the musical potential. A multitude of sound options, intuitive user interface and superb performance features make the Solaris a milestone in synthesizer history.<\/p>\n![\"John](\"http:\/\/greatsynthesizers.com\/wp\/wp-content\/uploads\/2011\/12\/JohnBowen-Solaris-Design.jpg\" "\\"JohnBowen-Solaris-Design\\"")
<\/a><\/p>\nSecond: “The Solaris is the life work of a synthesizer enthusiast and musician”<\/h2>\n
Third: “The king is dead, long live the king!”<\/h2>\n
<\/a><\/p>\n<\/a>Good things come to those who wait \u2026<\/h2>\n
A couple of impressions \u2026<\/h2>\n
<\/a><\/a>Polyphony?<\/h2>\n
<\/a>Sound and Performance<\/h2>\n
<\/a>Octave Up\/Down<\/h2>\n
<\/a>The tone-chameleon<\/h2>\n
4 Oscillators<\/h2>\n
\n
<\/a>2 Rotors<\/h2>\n
<\/a><\/a>4 Mixers<\/h2>\n
4 Filters<\/h2>\n
\n
<\/a>4 \u201cVCAs\u201d (in reality: 5 stereo amplifiers)
\n<\/strong><\/h2>\n5 LFOs<\/h2>\n
<\/a>6 Envelopes (in reality: 7 envelopes)<\/h2>\n
<\/a>Further features<\/h2>\n
\n
<\/a>A little more performance …<\/h2>\n
<\/a><\/a>Modulation Sources<\/h2>\n
\n
<\/a>Memory – the importance of the Compact Flash card<\/h2>\n
<\/a>Solaris and the local heavy weight JD-800<\/h2>\n
<\/a><\/a>Conclusion<\/h2>\n